Sharpening Service

More Information

For Secateurs, Clippers & Shears.

Niwaki offer a sharpening service for all tools THAT WE HAVE SUPPLIED (but not the saws, sorry). The deal: you send to us - we strongly recommend a tracked service such as Recorded Delivery - we do the work, then send them back, via our courier. Depending on how busy we are, it can take up to three weeks. If we feel the blades are beyond saving, we let you know. If you SUSPECT they’re beyond saving, get in touch before you send them, and we can talk about it.

What to do: Add to Order, print out the confirmation sheet and send in with your tools (one order is good for up to 2 pairs of Secateurs/Clippers/Scissors, or 1 pair of Shears). If you are ordering other stuff as well, we send it all together.

We give everything a good clean (within reason) and replace springs and bolts, if necessary, at no extra cost.

Options

Sharpening Service	$19.50
	exVAT

Delivering to US (Paying in USD) Edit

Please note: By law, we are not permitted to sell a knife or blade to any person under the age of 18. By placing an order for one of these items you are declaring that you are 18 years of age or over. These items must be used responsibly and appropriately.

Sharpening Service

8.8oz
In Stock - Available to dispatch worldwide, contact us for showroom stock availability

Global Delivery

Free delivery for orders over £/$/€100*
Price depends on location - adjust the COUNTRY tab in your basket to see the price.
We use DHL, FedEx, or UPS, and we’ll email you the tracking info.

*Customs fees may apply and are estimated during checkout. Surcharges may apply to some larger or heavier items to some areas.
* Please note Niwaki are not responsible for any import duty, taxes or fees incurred and these will be will be collected by our courier during customs clearance — For EU countries, when possible DHL will provide an estimate on the order confirmation page.

Caring For Your Tools

Most of our sharp tools are made from carbon steel - this means they may, through regular use, stain (and eventually rust) and gradually lose their edge. Caring for them involves three things…

1. Correct Use:

Japanese steel is hard and sharp, and can be more brittle than some people are used to - it will chip if abused
Do not cut wire, metal, stone, plastic or any other hard material (even bamboo fibres and some very hard woods, especially knots and burrs, can damage steel edges)
Do not twist or apply uneven pressure
Cut diagonally across branches (not straight across) so you cut along the fibres
Pay attention to our maximum cut dimensions, and don’t overdo it (shears are not loppers)
Use the base of the blades, not the tips, for heavier cuts

2. Keeping Them Clean:

Remove leaf resin, rust and gunk with a Clean Mate and water
Dry, wipe over with Camellia oil and store in a dry place

3. Keeping Them Sharp:

New tools won’t need sharpening for some time, but after a while you’ll notice them gradually lose their edge, especially if you’re box clipping (you need REALLY sharp blades to get a good finish with box). Use the Niwaki Sharpening Stones for best results (#1000 grit is best for general sharpening).