Okatsune Sharpening Stone
No.412

More Information

Sharpening Stone from Okatsune, with a grit of #400, ideal for everyday sharpening of secateurs and shears - just be careful not to drop it. There’s a bit more skill involved using whetstones, but the finish they give is second to none, and it’s well worth persevering to get the knack.

Wet the stone well before use, and don’t grind too hard. Most shears and secateurs are single bevelled - sharpen on the outside, and then smooth off the inside, going slightly over to remove the burr.

Tips

Secateurs, shears, clippers, whatever you use and whatever you call them - KEEP. THEM. SHARP.

Options

Okatsune Sharpening Stone	$16.50
	exVAT

Delivering to US (Paying in USD) Edit

Okatsune Sharpening Stone

2.5oz
6.1 x 1 x 0.4"
Ceramic Compound
Made in Onomichi, Japan
In Stock - Available to dispatch worldwide, contact us for showroom stock availability

Global Delivery

Free delivery for orders over £/$/€100*
Price depends on location - adjust the COUNTRY tab in your basket to see the price.
We use DHL, FedEx, or UPS, and we’ll email you the tracking info.

*Customs fees may apply and are estimated during checkout. Surcharges may apply to some larger or heavier items to some areas.
* Please note Niwaki are not responsible for any import duty, taxes or fees incurred and these will be will be collected by our courier during customs clearance — For EU countries, when possible DHL will provide an estimate on the order confirmation page.

Caring For Your Tools

Most of our sharp tools are made from carbon steel - this means they may, through regular use, stain (and eventually rust) and gradually lose their edge. Caring for them involves three things…

1. Correct Use:

Japanese steel is hard and sharp, and can be more brittle than some people are used to - it will chip if abused
Do not cut wire, metal, stone, plastic or any other hard material (even bamboo fibres and some very hard woods, especially knots and burrs, can damage steel edges)
Do not twist or apply uneven pressure
Cut diagonally across branches (not straight across) so you cut along the fibres
Pay attention to our maximum cut dimensions, and don’t overdo it (shears are not loppers)
Use the base of the blades, not the tips, for heavier cuts

2. Keeping Them Clean:

Remove leaf resin, rust and gunk with a Clean Mate and water
Dry, wipe over with Camellia oil and store in a dry place

3. Keeping Them Sharp:

New tools won’t need sharpening for some time, but after a while you’ll notice them gradually lose their edge, especially if you’re box clipping (you need REALLY sharp blades to get a good finish with box). Use the Niwaki Sharpening Stones for best results (#1000 grit is best for general sharpening).